More and more indoor cycling instructors come to class equipped with goniometers. But are they really helpful? Are instructors using them correctly? Many instructors do not know how to use them, and they are not as helpful as you think.
A goniometer is an instrument used to measure angles. Physical therapists use goniometers to measure joint angles to assess mobility and range of motion. A properly trained bike fitter will use a goniometer to assess multiple joints throughout the upper and lower body to establish proper alignment and optimal alignment for comfort, efficiency, and power production. Indoor cycling instructors can use a goniometer to assess the angle of the knee joint and make adjustments to a rider’s saddle height. Unfortunately, I’ve witnessed too many instructors using a goniometer incorrectly. Here are three mistakes instructors can make.
Landmarks
When measuring the angle of the knee with the foot at the bottom of the pedal stroke (6 o’clock), the greater trochanter, center of the knee joint line, and the lateral malleolus (ankle bone) should be used. The center of the knee joint and lateral malleolus are fairly easy landmarks to find. The greater trochanter, on the other hand, is located just above to the center of the hip area and usually requires one to touch (palpate) the hip. The greater trochanter of a fit person with minimal body fat is often located with a slight poke, while locating the same bony process of a person who is overweight can lean towards an embarrassing, seemingly inappropriate exploration. Since the arms of the more common and affordable goniometers are only between 6” and 12”, they are not remotely long enough to reach the landmarks needed. So guesswork and visual wizardry come into play. Considering the landmark trifecta: (1) knowing the landmarks, (2) finding the landmarks, and (3) existence of visual landmark wizardry, the goniometer is reduced to a highly adjustable boomerang.
Sitting Incorrectly
Providing one overcomes the above landmark challenge, the angles being measured are only truly useful if the rider is sitting in the saddle correctly. I’m planning on writing an article devoted to proper saddle alignment and position (yes, there is enough to say about this to easily warrant an entire article), but for now I’m just going to say enough to make my point. If a person is seated too far back, too far forward, or tilted incorrectly, the angles measured by the goniometer will be skewed. One might think, “Well, we are still measuring the angle the rider is achieving.” The problem often arises when the rider continues to move around in the saddle because it is uncomfortable and ineffective for generating power or endurance. This makes trying to establish a consistent measurement a moving target and ineffective for assessing saddle height.
Used to Measure, NOT Manipulate, Saddle Height
The biggest mistake instructors make is using the goniometer to dictate proper saddle height. Due to myriad factors, including flexibility, mobility, injury, and stability, the proper angle of the knee with the foot at the bottom of the pedal stroke (6 o’clock), can range from 135 to 172 degrees. That is quite a range. I’ve witnessed instructors attempting to force a rider into a higher saddle position because they measured 155 degrees and thought 165 degrees would be better. Each rider has their own healthy range of motion (due to the factors mentioned above); the goniometer is ONLY used to measure the optimal angle AFTER saddle height has been determined and NOT to prompt adjustment because a larger angle is thought to be better. Trying to influence a rider to change their position based on a number, instead of their body’s ability, is extremely dangerous and should never be done.
Should I Chuck My Goniometer in the Trash?
No. I believe the goniometer is great for creating a visual for the rider. For example, if you believe the rider is sitting too low and they seem reluctant to change, you can measure their knee angle and show them how it looks. As you show them their knee angle, start to expand the goniomter slowly indicating how you would like to try extending their leg for greater power, muscular endurance, and overall joint health. Most people want to “look good” when riding. If you show them how they may not be looking their best on the bike, they are more likely to allow you to make that needed adjustment. Whatever you do, do NOT tell them their knee angle. You will then start a highly dangerous competition as each person will try to obtain a better number than the next. Trust me on this. I’ve seen it happen.
Indoor Cycling Association
Director of Education and Master Presenter.
Cycling Fusion
Indoor Cycling Master Instructor and Coach
Adjunct Director of Education and Training
WEEKLY CLASSES:
Wednesday @ 6:30pm – Equinox, Back Bay
Friday @ 6:00am – Boston Sports Club, Waltham MA
Take a Class With Me!
Do you want to experience one of my cycling classes? Send me a quick message and I’ll get you a guest pass and sign you up for a bike. We can even grab a cup of coffee afterwards.